Drive XLR8 Herbicide Crabgrass Killer Review – UPDATED 2021

Every gardener wants a healthy and manicured lawn that features perennial flower beds and wonderful walkways. Drive XLR8 Herbicide Crabgrass Killer is trending these days. The product helps you remove these unwanted weeds without causing any damage to your lawn and flower beds.

It gets a little difficult to grow your favorite flower beds and the stone walkway when your lawn is filled with the clumps of crabgrass weeds (it gets the name from the fact that the grass resembles crab legs).

The only way to remove crabgrass from your lawn is by using an effective and high-quality crabgrass killer.

That’s the specialty of Drive XLR8 Herbicide Crabgrass Killer. Let’s see how this crabgrass killer can help you achieve a clean, fresh, and healthy lawn.

Drive XLR8 Herbicide

Drive XLR8 Herbicide Crabgrass Killer Review

Drive XLR8 Herbicide is a liquid formula that is designed to kill all kinds of unwanted weeds efficiently. You can use this bottle on over an acre of land. You don’t have to worry about your lawn and the healthy grass.

The formula is for crabgrass that hampers the growth of other plants. You only need to spray the liquid over the areas where you can spot the clumps of crabgrass.

It is only a matter of days before you can see the results. The best part is that Drive XLR8 Herbicide isn’t only for crabgrass only. The product can kill nearly all types of unnecessary weeds that can ruin your lawn.

The formula turns the crabgrass yellow in a few days. With this bottle of crabgrass killer, you don’t have to worry about your kids and pets playing on the lawn after application. It dries quickly. Besides, the formula is absolutely safe.

How To Use The Drive XLR8 Herbicide Crabgrass Killer Work?

As mentioned before, Drive XLR8 Herbicide is a selective post-emergent liquid formula. The liquid works on the selective weeds only, leaving the rest of the lawn unharmed.

You can use it for clovers, Kikuyu grass, dollar weed, and other such grassy weeds that ruin the look of your lawn. First things first, the manufacturer doesn’t offer the applicator with this product. So, you are going to have to buy that separately.

For application, you need a skid sprayer or a pump sprayer. You must use quality surfactant with the product for faster and better results. Let’s take a look at the steps for spraying the Drive XLR8 Herbicide on the crabgrass.

1.      Measure The Area

Measure the area of your lawn in square footage. You need 1 bottle of Drive XLR8 Herbicide for one acre. However, you don’t need to apply the formula over the entire lawn.

So, measure the space that needs to be treated with this water-based selected crabgrass killer. This will give you a better idea of the mixing rates.

If you want to treat a thousand square feet area, then you need to mix up to 1.45 ounces of this formula per gallon of water. If you are using methylated seed oil or any other surfactant with this product, then the mixing rate must be around 0.55 ounces of fluid for the same area.

Add 3 tablespoons of this crabgrass killer fluid and one and a half tablespoon of the surfactant to a gallon of water. You can use this solution for spot treatment of up to 1000 square feet.

2.      Create The Solution

Get the spray tank and fill it with a half-gallon of water. Mix the methylated seed oil or other surfactants with the Drive XLR8 Herbicide and add it to the spray tank.

Add the remaining half-gallon of water to this solution and close the tank. To mix the ingredients, shake this spray tank.

3.      Spray It

Once the Drive XLR8 Herbicide and the surfactant have mixed well and the ingredients are diluted in water, you can start the application. You don’t have to use the solution on the entire lawn. Just cover the spots that are filled with crabgrass and unnecessary weeds.

You can mark the area that needs to be covered. Do not spray the solution on the tree roots and ornamental plants. You must spray the Drive XLR8 Herbicide until the area gets wet. However, the liquid must not overflow.

Wait for a few days to see the results. The weeds will turn yellow and die eventually. Do not reapply the solution for the next 3-4 weeks.

You need to apply it in a way that the clumps of the crabgrass and other weeds come in contact with this solution. These weeds do not die until they are exposed to a potent crabgrass killer formula.

Drive XLR8 Herbicide works wonders on just about any lawn where the targeted weeds grow. You could also use it on turfgrass.

Is Drive XLR8 Herbicide Crabgrass Killer Safe?

Drive XLR8 Herbicide is safe. You can allow your children and pets to enter the lawn after application once the solution has dried. Use protective wear when applying the solution.

While it doesn’t harm your lawn, try not to spray more than 2.9 ounces per year. You can find the safety instructions on the product label. It is best to leave the lawn unattended for the next few hours. You don’t have to water the grass or mow the lawn after application.


·      Treat crabgrass in the mature stage

·      Effective liquid spray solution

·      Safe for commercial and residential lawns

·      Quick-dry solution

·      Rainfasts in an hour


·      Manufacturer doesn’t ship this product with an applicator


Drive XLR8 Herbicide Crabgrass Killer has proven to be a great solution to those unsightly tall weeds. You can use it for treating the selective weeds that are in the mature stages. A high-quality surfactant is highly recommended with this product for effective results. Check the price.

Check the manual before mixing it with the surfactant. You only need to apply a small amount of Drive XLR8 Herbicide with methylated seed oil to the target area.